Honda VFR800 Owner's Manual page 70

5.
Turn the seat over.
6. Install the rear seat cover ( ) to the seat.
7. Fit the stopper holes ( ) of rear seat
cover securely into the pins ( ).
8.
Install the seat properly (page
The grab rails must be returned to position
when riding in tandem.
(6)
(8)
(6) Rear seat cover
(7) Stopper holes
(8) Pins
www.ClassicCycles.org
6
7
8
58
).
(7)
Removal:
1. Removal can done in the reverse order of
installation.
Tighten the grab rail mounting bolts ( )
securely.
Grab rail mounting bolts torque:
22 N·m (2.2 kgf·m , 16 lbf·ft)
If a torque wrench was not used for
installation, see your Honda dealer as soon
as possible to verify proper assembly. The
grab rail could come off easily and result in
serious injury if the assembly is not made
properly.
2. Install the seat properly (page
2
58 ).
63