Honda VFR800 Owner's Manual page 38

BRAKES
Both the front and rear brakes are the
hydraulic disc types.
As the brake pads wear, the brake fluid
level drops.
There are no adjustments to perform, but
fluid level and pad wear must be inspected
periodically. The system must be inspected
frequently to ensure there are no fluid leaks.
If the control lever or pedal free travel
becomes excessive and the brake pads are
not worn beyond the recommended limit
(page 122 ), there is probably air in the
brake system and it must be bled. See your
Honda dealer for this service.
Front Brake Fluid Level:
With the motorcycle in an upright position,
check the fluid level. It should be above the
LOWER level mark ( ). If the level is at or
below the LOWER level mark, check the
brake pads for wear (page
www.ClassicCycles.org
1
122 ).
Worn pads should be replaced. If the pads
are not worn, have your brake system
inspected for leaks.
The recommended brake fluid is Honda
DOT 4 brake fluid from a sealed container,
or an equivalent.
(1) LOWER level mark
(1)
31