Loading Paper In A Tray - Sharp MX-M850 Quick Start Manual

Loading paper in a tray

To change the paper in a tray, load the desired paper in the tray and then change the tray settings in the machine
to specify the loaded paper. The procedure for changing the tray paper size is explained below. As an example,
the paper in tray 4 is changed from B4 (8-1/2" x 14") size plain paper to A4 (8-1/2" x 11") size recycled paper.
Downloaded From ManualsPrinter.com Manuals
Gently pull out the paper tray.
If paper remains in the tray, remove it.
Move the two guides on the tray to
change the size from B4 (8-1/2" x 14") to
A4 (8-1/2" x 11").
If the paper you are loading is a non-
standard size, lock the guides with
Insert the paper with the print side face
down.
Fan the paper well before inserting it.
Otherwise, multiple sheets may feed at
once and cause a misfeed.
Indicator line
The indicator line indicates the maximum
height of the paper that can be loaded in
the tray. When loading paper, make sure
that the stack is not higher than the
indicator line.
Use both hands to place the paper from
right overhead so that it does not fold.
Folds in the paper will cause misfeeds.
Gently push the tray into the machine.
.
17