ViewSonic PJD5112 Service Manual page 30

(2) Confirm LED indicator
LED Type Color
Power LED Blue
Lamp LED Off
Temp LED Off
Power LED Blue
Lamp LED Off
Temp LED Off
Power LED Blue
Lamp LED Off
Temp LED Off
Power LED Blue
Lamp LED Off
Temp LED Off
Power LED Blue
Lamp LED Red
Temp LED Red
Power LED Blue
Lamp LED Off
Temp LED Off
Power LED Blue
Lamp LED Off
Temp LED Off
Power LED Blue
Lamp LED Red
Temp LED Red
Power LED Blue
Lamp LED Red
Temp LED Red
Power LED Off
Lamp LED Red
Temp LED Red
ViewSonic Corporation
Status
Solid(LED× 1)
Off
Off
Solid(LED× 2)
Off
Off
Solid(LED× 2)
Off
Off
Flash(LED× 2)
Off
Off
Solid(Full brightness)
Solid
Flash
Solid(Full brightness)
Off
Off
Solid(Full brightness)
Solid
Solid
Flash(Full
brightness)
Solid
Solid
Solid(Full brightness)
Flash
Off
Off
Solid
Solid
Meaning
The projector is in standby mode.
Powering up
Normal operation
Power-down
The projector system has some problems with its
fans, so the projector cannot start up.
The lamp is in good condition and is projecting at
maximum brightness.
The lamp has reached its end of life and must be
changed soon. The lamp wil l continue to operate
until it fails. Change the lamp. If the lamp is off,
then the ballast will become malfunction.
The projector is shutting and the fan motor is
cooling the lamp for shutdown. Do not unplug the
power cord or turn the power off before the Lamp
LED changes to flashing. The fan motor will turn
off when the lamp has cooled.
Temperature is too high. The lamp will turn off.
The fan motor is cooling the lamp.
The lamp ignition failed. If temperature is too high,
the fans will cool the lamp.
27
Confidential - Do Not Copy PJD5112