ViewSonic PJD5112 Service Manual page 17

6.
Under the [DLP Composer Lite] screen, select [Flash Loader]. The Flash Loader screen appears.
7.
Click and select the firmware
[Browse]
8.
Make sure [Skip Boot Loader Area] is checked, and its value is [32KB].
9.
Press and hold the Enter and Power buttons simultaneously on the projector keypad and then plug in
the power cord on the projector until the projector Temp LED and Lamp LED are lit up. This indicates
that the projector is in the firmware download mode.
10. Click [Reset Bus] to reset and verify good USB connection.
11.
Click
[Start Download].
ViewSonic Corporation
file to update your projector.
[xxxxxxxxx.img]
14
Confidential - Do Not Copy
PJD5112