ViewSonic PJD5150 User Manual
  1. Manuals
  2. Brands
  3. ViewSonic Manuals
  4. Projector
  5. PJD5150
  6. User manual

ViewSonic PJD5150 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

PJD5150/PJD5250L
DLP Projector

User Guide

IMPORTANT: Please read this User Guide to obtain important information on installing
and using your product in a safe manner, as well as registering your product for future
service. Warranty information contained in this User Guide will describe your limited
coverage from ViewSonic Corporation, which is also found on our web site at http://
www.viewsonic.com in English, or in specific languages using the Regional selection
box in the upper right corner of our website. "Antes de operar su equipo lea cu
idadosamente las instrucciones en este manual"
Model No. VS15902/VS15905

Advertisement

Table of Contents
loading

Related Manuals for ViewSonic PJD5150

Summary of Contents for ViewSonic PJD5150

  • Page 1: User Guide

    Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http:// www.viewsonic.com in English, or in specific languages using the Regional selection box in the upper right corner of our website.
  • Page 2 At ViewSonic, we believe that our products have the potential to make a positive impact in the world, and we are confident that the ViewSonic product you have chosen will serve you well. Once again, thank you for choosing ViewSonic !

  • Page 3: Compliance Information

    Compliance Information FCC Compliance Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 4 Declaration of RoHS2 Compliance This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Proposed Maximum Substance...

  • Page 5: Important Safety Instructions

    Important Safety Instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this unit near water. Clean with a soft, dry cloth. Do not block any ventilation openings. Install the unit in accordance with the manufacturer’s instructions.

  • Page 6: Copyright Information

    PS/2, VGA and XGA are registered trademarks of International Business Machines Corporation. Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.

  • Page 7: Product Registration

    Product Registration To fulfill possible future product needs, and to receive additional product information as it becomes available, please visit your region section on ViewSonic’s website to register your product online. The ViewSonic CD also provides an opportunity for you to print the product registration form.

  • Page 8: Fcc Notice

    FCC notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

  • Page 9: Safety Instructions

    Safety instructions Read all of these instructions before you operate your projector and save for future reference. 1. Read instructions All the safety and operating instructions should be read before the appliance is operated. 2. Notes and warnings All notes and warnings in the operating instructions should be adhered to. 3.
  • Page 10 Notes on the AC power cord AC Power Cord must meet the requirement of countries where you use this projector. Please confirm your AC plug type with the graphics below and ensure that the proper AC Power Cord is used. If the supplied AC Power Cord does not match your AC outlet, please contact your sales dealer.

  • Page 11: Table Of Contents

    Table of contents Introduction ................... 1 Projector features ........................... 1 Package contents ..........................2 Projector overview ..........................3 Using the product .................. 5 Control panel ............................5 Connection ports ............................ 7 Remote control ............................8 Installing the batteries .......................... 11 Remote control operation ........................

  • Page 12: Introduction

    Introduction Projector features The projector integrates high-performance optical engine projection and a user - friendly design to deliver high reliability and ease of use. The projector offers the following features: ® • Compatibility with Macintosh computers • Compatibility with NTSC, PAL, SECAM and HDTV •...

  • Page 13: Package Contents

    PJD5150/PJD5250L Remote control (IR) & AC power cord projector batteries (AAA *2 PCS) VGA cable (D-SUB to D-SUB) ViewSonic CD wizard Quick start guide Optional accessories 1. Cable management cover (rear cable cover) 2. Carry bag 3. Dust filter Note •...

  • Page 14: Projector Overview

    Projector overview Front view 1. Front IR remote control sensor 2. Projection lens 3. Ventilation holes 4. Focus ring 5. Zoom ring 6. Control panel 7. Lamp cover...

  • Page 15: Rear View

    Rear View MINI VIDEO RS-232 COMPUTER IN 1. Connection ports 2. Kensington lock 3. AC power socket Bottom View Ceiling mount screws: 65.89 M4 x 8 (Max. L = 8 mm) Unit: mm 113.54 60.01 1. Security bar 2. Ceiling mount holes Note •...

  • Page 16: Using The Product

    Using the product Control panel Menu Exit Enter Blank Color Source / Mode POWER Turn the projector on or off. 2. Blank/ Left key Hide the screen picture. 3. Menu/Exit Menu: Display or exit the on-screen display menus. Exit: Goes back to previous OSD menu, exits and saves menu settings. 4.
  • Page 17 Refer to “LED Indicator Messages”. 11. Color Mode Select the picture setup mode. 12. Source/ (Help) Source: Display the source selection bar. Help: Display the HELP menu by a long press for 3 seconds.

  • Page 18: Connection Ports

    Connection ports MINI VIDEO RS-232 COMPUTER IN 1. COMPUTER IN Connect image input signal (analog RGB or component) to this jack. 2. RS-232 When operating the projector via a computer, connect this to the controlling com- puter's RS-232C port. 3. VIDEO Connect composite video output from video equipment to this jack.

  • Page 19: Remote Control

    Remote control Power Turn the projector on or off. 2. COMP1 Display COMPUTER IN 1 signal. 3. Auto Sync Automatically determines the best picture timings for the displayed image. (Keystone) Manually correct distorted images resulting from an angled projection. (Up)/ (Down)/ (Left)/ (Right)
  • Page 20 Lock: Activates or disables panel key lock. ID Set: Sets remote control code. (Timer) Activate P-Timer OSD menu. Not available for PJD5150/PJD5250L 14. Eco Mode Switch the lamp mode from Normal, Economic, Dynamic to Sleep. Not available for PJD5150/PJD5250L. (My Button) User definable key for customized function.

  • Page 21: Remote Control Code

    Using the remote mouse control The capability of operating your computer with the remote control gives you more flexibility when delivering presentations. 1. Connect the projector to your PC or notebook with a USB cable prior to using the remote control in place of your computer’s mouse. See "Connection"...

  • Page 22: Installing The Batteries

    Installing the batteries 1. Open the battery cover in the direction shown. 2. Install batteries as indicated by the diagram inside the compartment. 3. Close the battery cover into position. Caution • Risk of explosion if battery is replaced by an incorrect type. •...

  • Page 23: Remote Control Operation

    Remote control operation Point the remote control at the infrared remote sensor and press a button. • Operating the projector from the front. Note • The remote control may not operate when there is sunlight or other strong light such as a fluorescent lamp shining on the remote sensor.

  • Page 24: Connection

    Connection When connecting a signal source to the projector, be sure to: 1. Turn all equipment off before making any connections. 2. Use the correct signal cables for each source. 3. Ensure the cables are firmly inserted. MINI VIDEO RS-232 COMPUTER IN 1.

  • Page 25: Connecting A Computer Or Monitor

    Connecting a computer The projector provides two VGA input sockets that allow you to connect them to both ® ® compatibles and Macintosh computers. A Mac adapter is needed if you are connecting legacy version Macintosh computers. To connect the projector to a notebook or desktop computer: 1.

  • Page 26: Connecting A Composite Video Source Device

    Connecting a composite Video source device Examine your Video source device to determine if it has a set of unused composite Video output sockets available: • If so, you can continue with this procedure. • If not, you will need to reassess which method you can use to connect to the device. To connect the projector to a composite Video source device: 1.

  • Page 27: Operation

    Operation Powering on/off the projector Powering on the projector: 1. Complete the AC power cord and peripheral signal cable(s) connections. 2. Press to turn on the projector. The projector takes a minute or so to warm up. • If the projector is still hot from previous activity, it will run the cooling fan for approximately 60 seconds before energizing the lamp.

  • Page 28: Adjusting The Projector Height

    Adjusting the projector height Elevator foot The projector is equipped with an elevator foot to adjust the image height. To raise or lower the image, turn the elevator foot to fine-tune the height. Note • To avoid damaging the projector, make sure that the elevator foot is fully retracted before placing the projector in its carrying case.

  • Page 29: Adjusting Projection Image Size

    Adjusting projection image size Refer to the graphic and table below to determine the screen size and projection distance. Diagonal size Screen Center of lens Projection distance Vertical offset 4 : 3 Screen diagonal Projection distance Screen size [inch (m)] Vertical offset [inch (cm)] Diagonal...

  • Page 30: Securing The Projector

    3~5 seconds. 2. Write down the number and turn off your projector. 3. Seek help from the local ViewSonic service center to decode the number. You may be required to provide proof of purchase documentation to verify that you are an authorized user of the projector.

  • Page 31: Disabling The Password Function

    Disabling the password function To disable password protection, go back to SYSTEM SETTING: ADVANCED > Advanced > Security Settings > Power on Lock menu, and press Enter. You will be asked to input password. Once the password is set, the OSD menu returns to the Power On Lock.

  • Page 32: Locking Control Keys

    Locking control keys With the control keys on the projector locked, you can prevent your projector settings from being changed accidentally (by children, for example). When the Panel Key Lock is on, no control keys on the projector will operate except Power.

  • Page 33: Setting The Presentation Timer

    Setting the presentation timer The presentation timer can indicate the presentation time on the screen to help you achieve better time management when giving presentations. Follow these steps to utilize this function: 1. Press Timer on the remote control to access the Presentation Timer menu or go to the SYSTEM SETTING: BASIC >...

  • Page 34: Menu Operation

    Menu operation The projector has multilingual on-screen display menus that allow you to make image adjustments and change a variety of settings. How to operate 1. Press Menu to open the OSD menu. 2. When OSD is displayed, use to select any feature in the main menu. 3.
  • Page 35 Menu tree Main Menu Sub Menu Settings Screen Color Off / Blackboard / Greenboard / Whiteboard Aspect Ratio Auto / 4:3 / 16:9 / Anamorphic/ Keystone -40 - 40 X: -5 - 5 Position DISPLAY Y: - 5 - 5 Phase 0 - 31 H.
  • Page 36 Disable / 5 min / 10 min / 15 min / 20 min / 25 min Blank Timer / 30 min Splash Screen Black / Blue / ViewSonic/ Off Auto Sync / Projector Position / Menu Position / Color Temp. / Brightness / Contrast / 3D Settings My Button...
  • Page 37 High Altitude Off / On Mode Off / On Closed Caption Off / On Enable Closed Caption Caption Version CC1 / CC2 / CC3 / CC4 Normal / Economic / Dynamic / Lamp Mode Sleep Mode Lamp Settings Reset Lamp Reset / Cancel Hours SYSTEM...

  • Page 38: Screen Color

    DISPLAY Screen Color The Screen Color feature can help correct the projected picture’s colors to prevent possible color difference between the source and projected pictures. There are several precalibrated colors to choose from: Whiteboard, Greenboard, and Blackboard. Aspect Ratio Select how the picture fits on the screen: •...
  • Page 39 5. To reduce size of the picture, press Enter to switch back to the zoom in/out functionality, and press Auto Sync to restore the picture to its original size. You can also press repeatedly until it is restored to the original size. Using the OSD menu 1.

  • Page 40: Color Mode

    PICTURE Color Mode There are many factory presets optimized for various types of images. • Brightest: Maximizes the brightness of the projected image. This mode is suitable for environments where extra-high brightness is required. • Dynamic: Is designed for presentations under daylight environment to match PC and notebook coloring.
  • Page 41 Effect the represent of dark scenery. With greater gamma value, dark scenery will look brighter. Brilliant Color This adjustable item utilizes a new color-processing algorithm and system level enhancements to enable higher brightness while providing true, more vibrant colors in picture.

  • Page 42: Auto Power On

    SOURCE Quick Auto Search Automatically scan through all the input source if the function in the OSD menu is On. The function will stop the signal auto scan process and fix the signal source you preferred if you turn Off the Quick Auto Search. 3D Settings This projector features a 3D function which enables you to enjoy the 3D movies, vid- eos, and sporting events in a more realistic way by presenting the depth of the...
  • Page 43 Quick Power Off • ON: Quick power on function speeds up the cooling process when turning off the projector. • OFF: Turn off with cooling procedure. Note • When Desable is selected, the Smart Restart function will be automatically turned OFF.

  • Page 44: Projector Position

    SYSTEM SETTING: BASIC Language Select the language used by the on-screen menu. Projector Position Adjust the picture to match the orientation of the projector: upright or upside-down, in front of or behind the screen. Invert or reverse the image accordingly. Menu Settings Menu Display Time Duration of OSD menu display countly starts (at idle state by second).

  • Page 45: High Altitude Mode

    SYSTEM SETTING: ADVANCED High Altitude Mode Use this function to allow the fans operates at full speed continuously to achieve proper high altitude cooling of the projector. DCR (Dynamic Contrast Ratio): Enable DCR will further enhance contrast ratio by darkening the black scenes. Disable DCR will resume to normal contrast performance.
  • Page 46 • Power on Lock: If you enable this function, you will have to enter the password next time you turn on the projector. "Securing the projector" on page 20 for details. Panel Key Lock Disables or enables all panel key functions except Power on the projector and keys on the remote control.
  • Page 47 INFORMATION Current System Status Shows the currect system status. Source Shows the current signal source. Color Mode Shows the selected mode in the Color Mode menu. Resolution Shows the native resolution of the input signal. Color System Shows input system format, NTSC, PAL, SECAM, or RGB. Lamp Hours Displays the number of hours the lamp has been used.

  • Page 48: Maintenance

    Maintenance The projector needs proper maintenance. You should keep the lens clean as dust, dirt or spots will project on the screen and diminish image quality. If any other parts need replacing, contact your dealer or qualified service personnel. When cleaning any part of the projector, always switch off and unplug the projector first.

  • Page 49: Installing The Dust Filter (Optional Accessory)

    Installing the dust filter (optional accessory) Caution • It is important to clean the dust filter every 100 hours after the dust filter is installed. • Be sure to turn off the projector and unplug it from power source before installing or detaching the filter.

  • Page 50: Installing The Cable Management Cover (Optional Accessory)

    Resetting the filter timer 5. Open the OSD menu and go to the SYSTEM SETTING: ADVANCED > Filter Settings menu. 6. Press Enter and the Filter Settings page is displayed. 7. Highlight Reset Filter Hours and press Enter. A warning message is displayed asking if you want to reset the filter timer.

  • Page 51: Replacing The Lamp

    Replacing the lamp As the projector operates over time, the brightness of the projector lamp gradually decreases and the lamp becomes more susceptible to breakage. We recommend replacing the lamp if a warning message is displayed. Do not attempt to replace the lamp yourself.
  • Page 52 1. Turn off the projector. 2. If the projector is installed in a ceiling mount, remove it. 3. Unplug the power cord. 4. Loosen the screw in the side of the lamp cover.1 5. Remove the cover.2 6. Loosen the screws from the lamp module.3 7.

  • Page 53: Specifications

    Specifications Model name PJD5150 PJD5250L Dislay system Single 0.55" DLP panel Resolution SVGA (800 x 600 pixels) XGA (1024 x 768 pixels) Zoom 1.1x F/No. 2.5 - 2.7 Focal length 22.08 - 24.28mm Screen size 30” - 300” Lamp 203W...

  • Page 54: Dimensions

    Dimensions 362 mm (W) x 231 mm (D) x 109 mm (H) Ceiling mount installation Ceiling mount screws: M4 x 8 (Max. L = 8 mm) 65.89 Unit: mm 113.54 60.01...

  • Page 55: Appendix

    Appendix LED indicator messages LED Type Color Status Meaning Power LED Blue Solid Normal power of standby mode . Temp LED (Not available for PJD5 series) Lamp LED Power LED Blue Flash Temp LED Low power of standby mode. Lamp LED Power LED Blue Flash...

  • Page 56: Compatibility Modes

    Compatibility modes Supported 3D signal for PC input Horizontal Vertical Pixel 3D frame 3D top 3D side Resolution frequency frequency Frequency sequential bottom by side (KHz) (Hz) (MHz) 59.94 31.469 25.175 ◎ ◎ ◎ 72.809 37.861 31.500 640 x 480 37.5 31.500 85.008...
  • Page 57 Supported timing for Component-YPbPr input Horizontal Pixel Vertical Timing Resolution Frequency Frequency Frequency (Hz) (kHz) (MHz) 480i* 720 x 480 59.94 15.73 13.5 480p* 720 x 480 59.94 31.47 576i 720 x 576 15.63 13.5 576p 720 x 576 31.25 720/50p 1280 x 720 37.5...

  • Page 58: Troubleshooting

    Troubleshooting Refer to the symptoms and measures listed below before sending the projector for repairs. If the problem persists, contact your local reseller or service center. Please refer to "LED Indicator Messages" as well. Start-up problems If no lights turn on: •...

  • Page 59: Rs-232 Command And Configuration

    RS-232 command and configuration D-Sub 9 pin Wire List 1 CD COLOR Black Brown Orange Yellow Green Blue Purple White SHELL SHELL Baud Rate 115200 bps Data Length 8 bit Parity Check None Stop Bit 1 bit Flow Control None...
  • Page 60 0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x0A 0x01 0x68 Splash Screen 0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x0A 0x02 0x69 Write ViewSonic Splash Screen Splash Screen 0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x0A 0x03 0x6A Screen Capture...
  • Page 61 Contrast decrease 0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x02 0x00 0x60 Write Contrast increase 0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x02 0x01 0x61 Contrast 0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x12 0x02 Read Contrast ratio 0x61 Brightness decrease 0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x03 0x00 0x61 Write Brightness increase...
  • Page 62 Primary color R 0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x10 0x00 0x6E Primary color G 0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x10 0x01 0x6F Primary color B 0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x10 0x02 0x70 Write Primary color C 0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x10 0x03 0x71 Primary Color...
  • Page 63 English 0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x00 0x61 0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x01 0x62 Deutsch 0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x02 0x63 Italiano 0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x03 0x64 0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x04 0x65 0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x05 0x66 0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x06 0x67...
  • Page 64 Menu 0x02 0x14 0x00 0x04 0x00 0x34 0x02 0x04 0x0F 0x61 Exit 0x02 0x14 0x00 0x04 0x00 0x34 0x02 0x04 0x13 0x65 0x02 0x14 0x00 0x04 0x00 0x34 0x02 0x04 0x0B 0x5D Bottom 0x02 0x14 0x00 0x04 0x00 0x34 0x02 0x04 0x0C 0x5E Left 0x02 0x14 0x00 0x04 0x00 0x34 0x02 0x04 0x0D 0x5F Remote Key...

  • Page 65: Ir Control Table

    IR control table System Code: 83F4 Format : NEC Power COMP1 COMP2 HDMI Auto Source Sync Enter Menu Exit PgUp PgDn Mouse Pattern Blank ID set Color Mode Mode RCP01051...
  • Page 66 Format Byte1 Byte2 Byte3 Byte4 Freeze PgDn PgUp Blank Auto sync Down Left Right Color Mode Aspect Mute Enter Power ON Magnify Presentation Timer Exit D. ECO (Eco mode) Menu Mouse Mouse Left Mouse Right Source VGA (PC) Pattern My button Key pad lock RC ID Address code...

  • Page 67: Customer Support

    Latin America C= http://www.viewsonic.com/ www.viewsonic.com/la/ soporte@viewsonic.com (Mexico) la/soporte/servicio-tecnico Nexus Hightech Solutions, Cincinnati #40 Desp. 1 Col. De los Deportes Mexico D.F. Tel: 55) 6547-6454 55)6547-6484 Other places please refer to http://www.viewsonic.com/la/soporte/servicio-tecnico#mexico Latin America C= http://www.viewsonic.com/ www.viewsonic.com/la/ soporte@viewsonic.com (Peru) la/soporte/servicio-tecnico Macau www.hk.viewsonic.com T= 853 2870 0303 service@hk.viewsonic.com...

  • Page 68: Limited Warranty

    If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
  • Page 69 Exclusion of damages: ViewSonic's liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: Damage to other property caused by any defects in the product, damages based upon...

  • Page 70: Mexico Limited Warranty

    Exclusion of damages: ViewSonic's liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business relationships, or other commercial loss, even if advised of the possibility of such damages.
  • Page 71 Tel: (52) 999-925-1916 Tel: 01(52)95-15-15-22-22 E-Mail: rrrb@sureste.com Fax: 01(52)95-15-13-67-00 E-Mail. gpotai2001@hotmail.com Tijuana: FOR USA SUPPORT: ViewSonic Corporation Av Ferrocarril Sonora #3780 L-C 14035 Pipeline Ave. Chino, CA 91710, USA Col 20 de Noviembre Tel: 800-688-6688 (English); 866-323-8056 (Spanish); Tijuana, Mexico E-Mail: http://www.viewsonic.com...

This manual is also suitable for:

Pjd5250l

Table of Contents