Table of Contents
Advertisement
• When [X] has not been set, [ALARM CLOCK] is not available.
• When [SILENT MODE] is set to [ON], the alarm will not sound.
• When [DUALTIME] is set to [ON], the alarm sounds according to the dual time date and time
setting.
Setting an alarm
ALARM C LOC K
TIME
SNOOZE
ALARM SOUND
MOVE
TIME
SNOOZE
ALARM SOUND 1 LOW / MID / HIGH
Operating, shutting off and checking the alarm
• Operating the alarm:
Turn off the camera. The alarm only operates when the camera is off.
• Shutting off the alarm:
While the alarm is sounding, press any button to shut off the alarm and turn off the camera.
Note that pressing o, K/h/s or q/P will turn the camera on. (Pressing K/
h/s and q/P will turn the camera on only when [K/q] is set to [YES].)
When [SNOOZE] is [OFF], the alarm stops automatically and the camera turns off after 1
minute of no operation.
• Checking the alarm settings:
While the camera is off, press m/Y to display the current and alarm set times. Times
will be displayed for 3 seconds.
VIDEO OUT
NTSC
The factory default settings differ according to the region where the camera is sold.
To play back camera images on a TV, set the video output according to your TV's video signal
type.
• TV video signal types differ by country/region. Check the video signal type before connecting
the camera to the TV.
NTSC: North America, Taiwan, Korea, Japan
PAL:
European countries, China
36
EN
• Select [ONE TIME] or [DAILY], and set the alarm time.
• You can set snooze or alarm sounds and volume.
0 9 : 0 0
0 9 : 0 0
SET
OK
Sets the alarm time.
OFF
No snooze is set.
ON
Alarm is activated every 5 minutes, up to 7 times.
2 LOW / MID / HIGH
3 LOW / MID / HIGH
................................................................................Playing back pictures on a TV
/ PAL
Advertisement
Table of Contents
