Olympus Stylus 720 SW Advanced Manual page 67

Monitor indication
This card cannot be
C ARD S E TU P
used in this camera. Or,
the card is not formatted.
POWER OFF
FORMAT
SET
OK
There is an error in the
MEM ORY SETUP
internal memory.
POWER OFF
MEMORY FORMAT
SET
OK
The camera is not
connected to the printer
NO CONNECTION
correctly.
There is no paper in the
printer.
NO PAPER
The printer has run out
of ink.
NO INK
The paper is jammed.
JAMMED
The printer's paper tray
has been removed or
SETTINGS
the printer has been
CHANGED
operated while changing
settings on the camera.
There is a problem with
the printer and/or
camera.
PRINT ERROR
Pictures recorded on
r
other cameras may not
be printed on this
CANNOT PRINT
camera.
Possible cause Corrective action
Format the card or replace.
• Select [POWER OFF] and press o.
Insert a new card.
• Select [FORMAT]
o. All data on the card is erased.
Select [MEMORY
[YES] and press o. All
FORMAT]
data in the internal memory is
erased.
Disconnect the camera and connect
it again correctly.
Load some paper in the printer.
Replace the ink cartridge in the
printer.
Remove the jammed paper.
Do not operate the printer while
changing settings on the camera.
Turn off the camera and printer.
Check the printer and remedy any
problems before turning the power
on again.
Use a computer to print.
[YES] and press
67
5