Olympus SP-590 UZ Instruction Manual page 53

Adjust the settings for the functions while referring to "Using the Menu" (p. 3).
Resetting the file names of images
[FILE NAME]
E SETUP  FILE NAME
Folder name Folder name
DCIM 100OLYMP
999OLYMP
Automatic
numbering
Pmdd
Submenu 2
This resets the sequential number
for the folder name and file name
RESET whenever a new card is inserted.
This is useful when grouping
images on separate cards.
Even when a new card is inserted,
this continues the numbering for
the folder name and file name from
AUTO the previous card. This is useful for
managing all image folder names
and files names with sequential
numbers.
The number for the folder name is reset to 100, and
*1
the number for the file name is reset to 0001.
File name
Pmdd0001.jpg
Pmdd9999.jpg
Automatic
numbering
Month: 1 to C
(A=October,
B=November,
C=December)
Day: 01 to 31
Application
*1
Adjusting the CCD and image
processing function [PIXEL MAPPING]
E SETUP  PIXEL MAPPING
This function has already been adjusted
at factory shipping, so no adjustment is
needed right after purchase. Approximately
once a year is recommended.
For best results, wait at least 1 minute after
taking or viewing pictures before performing
pixel mapping. If the camera is turned
off during pixel mapping, repeat the pixel
mapping process.
Adjusting the CCD and image
processing function
1 Press the o button when [START]
(submenu 2) is displayed.
●
The camera checks and adjusts the CCD
and the image processing function at the
same time.
 
EN