Olympus SP-590 UZ Instruction Manual page 36

Adjusting the flash intensity [w]
K CAMERA MENU  w
In certain situations, it is advisable to adjust the flash intensity, such as when shooting small subjects
or distant backgrounds. This function is also used when increased contrast is desired.
Submenu 2
−2.0 to +2.0
Using an external flash [ Q FLASH]
K CAMERA MENU  Q FLASH
Submenu 2
IN
#RC
SLAVE
"Taking pictures with the Olympus Wireless RC Flash System" (p. 74)
When set to [SLAVE], the flash setting automatically changes to [# FILL IN] (p. 23).
When set to [SLAVE], the flash can fire when [DRIVE] (p. 32) is set to a setting other than [o], but if
the flash intensity is large, the interval between sequential shots becomes longer.
 EN
Adjust the flash intensity for the shooting scene.
Submenu 3
— The built-in flash is used for taking pictures.
An Olympus Wireless RC Flash System compatible flash is
CH1 to CH4 used for taking pictures. The channel (CH1 to CH4) can be
selected.
The commercially-available slave flash that is synchronized
1 to 10 with the camera flash is used for taking pictures. The flash
intensity setting can be adjusted.
: P A S M r  I
Application
: P A S M r  I
Application