Olympus SP-550UZ Instruction Manual page 69

When you get an error message on the camera
Monitor indication
q
CARD ERROR
q
WRITE-PROTECT
>
MEMORY FULL
q
CARD FULL
L
NO PICTURE
r
PICTURE ERROR
r
THE IMAGE CANNOT
BE EDITED
CARD-COVER OPEN
g
BATTERY EMPTY
Recording has
stopped to allow
camera to cool.
Please wait a
moment.
Camera is cooling.
Please wait a
moment.
C ARD S E TUP [ x D ]
POWER OFF
FORMAT
SET
OK
Possible cause
There is a problem with the
card.
Writing to the card is
prohibited.
The internal memory has no
available memory and
cannot store any new data.
The card has no available
memory and cannot store
any new data.
There are no pictures in the
internal memory or on the
card.
There is a problem with the
selected picture and it
cannot be played back on
this camera.
If pictures taken by other
cameras are selected, they
cannot be edited.
The card cover is open.
The battery is empty.
When [IMAGE STABILIZER]
is set to [ON], the camera's
internal temperature rises
due to continuous movie
recording for a long period,
thereby causing shooting to
stop.
This card cannot be used in
this camera. Or, the card is
not formatted.
Corrective action
This card cannot be used. Insert a new
card.
The recorded image has been protected
(read-only) on a computer. Download the
image to a computer and cancel the read-
only setting.
Insert a card or erase unwanted data.
Before erasing, backup the data of
important pictures onto the card, or
download such pictures to a computer.
Replace the card or erase unwanted data.
Before erasing, download important
pictures to a computer.
The internal memory or the card contains
no pictures.
Record pictures.
Use image processing software to view the
picture on a computer. If that cannot be
done, the image file is damaged.
Use image processing software to edit the
pictures.
Close the card cover.
Insert new batteries. When using
rechargable batteries, charge the
batteries.
Allow the camera to cool down for some
time before you begin shooting again. Or
you can shoot with [IMAGE STABILIZER]
set to [OFF].
Format the card or replace.
• Select [POWER OFF] and press o.
Insert a new card.
• Select [FORMAT] [YES] and press
o. All data on the card is erased.
69
EN