Troubleshooting - Singer SG450R Instruction Manual

TROUBLE SHOOTING
Problems Possible causes
Iron The appliance has not been plugged
doesn't into the power supply
heat up
The temperature control dial is set at
the MIN position
The appliance has not been switched
on
Any unknown factor
The ap- The water tank is empty
pliance
The fi lter has not been placed in the
does not
water tank
produce
Water tank is not well assembled
steam
The adjustable steam knob is set at
MIN
During use, steam chamber has
not been heated up to the desired
temperature
Droplets During steam ironing, the tempera-
of water ture control dial is set at a lower tem-
escape perature position for steam ironing
from the
The desired temperature has not
soleplate
been reached
The adjustable steam knob is set too
high
Disposal of old Electrical & Electronic Equipment (Applicable in the European Union and
other European countries with separate collection systems).
This symbol on the product or on its packaging indicates that this product shall not
be treated as household waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic equipment. By ensur-
ing this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be
caused by inappropriate waste handling of this product. The recycling of materials
will help to conserve natural resources. For more detailed information about recy-
cling of this product, please contact your local city offi ce, your household waste disposal service
or the shop where you purchased the product.
Solution
Connect the appliance to the power
supply
Set the temperature control dial to the
desired position
Switch the appliance on by pressing the
power switch button at the base
Stop the use and take the appliance to
any SINGER Service Center
Refi ll the water tank
Assemble the fi lter into the water tank
Pull the water tank out and then insert it
back into the base unit. It will be lock in
place until a click sound is produced
Set the adjustable steam knob to MAX
Do not use the appliance Until the heat-
ing indicator light turns off
Select the required temperature accord-
ing to the fabric setting chart
It is ready for use when the heating indi-
cator light on the base unit turns off
Set the adjustable steam knob to a lower
position
10
ENGLISH