Olympus FE-220 Quick Start Manual page 47

• Data transfer is not guaranteed in the following environments, even if your computer
is equipped with a USB port.
• Windows 95/98/NT 4.0
• Windows 98SE upgrades from Windows 95/98
• Mac OS 8.6 or earlier
• Computers with a USB port added by means of an extension card, etc.
• Computers without a factory-installed OS and home-built computers
To increase the number of languages
Please take care that your battery is fully charged!
1
Make sure that your computer is connected to the Internet.
2
Plug the USB cable into the USB port on the computer.
3
Plug the other end of the USB cable into the camera's USB
connector.
• The camera turns on automatically.
• The monitor turns on and the selection screen for the USB connection is
displayed.
4
Select [PC], and press i.
5
In the browse window, select "Camera", then "Update Camera/Add
Display Language".
• The confirmation window for updating is displayed.
6
Click "OK".
• The updating the camera window is displayed.
7
Click "Add Language" in the
updating camera display.
• The "Add Display Language of
Camera" window is displayed.
8
Click and select a language.
9
Click "Add".
• The new language is downloaded to your
camera. Please do not remove any cable or
the battery while the camera is processing.
10
After the download procedure the camera display will show "OK".
You can remove the cables and turn power off. After restarting the
camera you will be able to choose the new language from [SET
UP].
47
EN