Olympus FE-220 Quick Start Manual page 27

W
................................................................................... Selecting a display language
You can select a language for on-screen display. Available languages vary depending
on the area where you purchased this camera.
You can add other languages to your camera with the provided OLYMPUS Master
software.
PIXEL MAPPING
The pixel mapping feature allows the camera to check and adjust the CCD and image
processing functions. It is not necessary to operate this function frequently.
Approximately once a year is recommended. Wait at least one minute after taking or
viewing pictures to allow the pixel mapping function to perform properly. If you turn the
camera off during pixel mapping, start again.
Select [PIXEL MAPPING] and when [START] is displayed, press i.
K/q
........................................................................ Turning on the power with K/q
YES/ NO
You can turn on the power by pressing either K or q.
s
................................................................................Changing the monitor brightness
BRIGHT/ NORMAL
BEEP
................................. Adjusting the volume of beeps when buttons are pressed
OFF (No sound) / LOW/ HIGH
8
..............................................................Adjust the volume of camera warning sound
OFF (No sound) / LOW/ HIGH
SHUTTER SOUND
OFF (No sound) / LOW/ HIGH
........................................Adjusting the image processing function
.................................Adjusting the volume of the shutter button
27
EN