Install The Olympus Master Software; Operating Environment - Olympus FE-220 Quick Start Manual

Install the OLYMPUS Master software

Before installing the OLYMPUS Master software, please confirm that your computer
is compatible with the following system requirements.
For newer operating systems, please refer to the Olympus web site as shown on the
back cover of this manual.

Operating environment

Windows
OS
CPU
RAM
Hard disk capacity 500 MB or more
Monitor
Other
Note
• Windows 98/98SE/Me are not supported.
• Use a computer with a pre-installed operating system. Operations are not guaranteed
on home-built computers or computers with an updated operating system.
• Operations are not guaranteed when using an added USB port or IEEE 1394 port.
• To install the software, you must log on as a user with administrators' privileges.
Macintosh
OS
CPU
RAM
Hard disk capacity 500 MB or more
Monitor
Other
40
EN
Windows 2000 Professional/XP Home Edition/XP Professional/
Vista
Pentium III 500 MHz or later
256 MB or more
1,024 × 768 pixels or more
65,536 colors or more (16.77 million colors or more
recommended)
USB port or IEEE 1394 port
Internet Explorer 6 or later
QuickTime 7 or later recommended
DirectX 9 or later recommended
Mac OS X v10.3 or later
Power PC G3 500 MHz or later
Intel Core Solo/Duo 1.5 GHz or later
256 MB or more
1,024 × 768 pixels or more
32,000 colors or more (16.77 million colors or more
recommended)
USB port or IEEE 1394 port (FireWire)
Safari 1.0 or later (1.3 or later recommended)
QuickTime 6 or later