Disconnecting The Usb Cable - Olympus FE-220 Quick Start Manual

To disconnect the camera
1
Make sure that the card access lamp has
stopped blinking.
2
Make the following preparations for

disconnecting the USB cable.

Windows
1 Click the "Unplug or Eject Hardware" icon
system tray.
2 Click the message that is displayed.
3 When a message is displayed saying that the
hardware can be ejected safely, click "OK".
Macintosh
1 The trash icon changes to the eject icon when the
"Untitled" or "NO_NAME" icon on the desktop is
dragged. Drag and drop it on the eject icon.
3
Disconnect the USB cable from the camera.
Note
• Windows: When you click "Unplug or Eject Hardware", a warning message may be
displayed. Make sure that image data is not being downloaded from the camera and
that all applications are closed. Click the "Unplug or Eject Hardware" icon again and
disconnect the cable.
Card access lamp
in the
45
EN