Other Print Modes And Print Settings - Olympus FE-120 Advanced Manual

Direct printing (PictBridge)

Other print modes and print settings

There are many other print modes available besides the basic mode. Even within the
same mode, you have the choice of setting a border or the paper size.
Follow the operation guide for the screens shown below.
Selecting a print mode
PRINT
ALL PRINT
MULTI PRINT
ALL INDEX
PRINT ORDER Prints the pictures according
Setting the paper
Select the paper size and border on the [PRINTPAPER] screen.
SIZE
7
BORDERLESS
OFF ( )
ON ( )
PICS/SHEET
Note
• If the [PRINTPAPER] screen is not displayed, [SIZE], [BORDERLESS] and
[PICS/SHEET] are set to [STANDARD].
82
Prints the selected picture.
Prints all the pictures stored in
the internal memory or card.
Prints one picture in multiple
layout format.
Prints an index of all the
pictures stored in the internal
memory or card.
to the print reservation data. If
no print reservations have been made, this option is not available.
g"Print settings (DPOF)" (P. 85)
Choose from the available
paper sizes on your
printer.
Select framed or
unframed. In [MULTI
PRINT] mode, you cannot
select the frame.
The picture is printed
inside a blank frame.
The picture is printed filling the entire page.
Available in [MULTI PRINT] mode only. The number of prints
that can be printed vary depending on the printer.
PRINT MODE SELECT
PRINT
ALL PRINT
MULTI PRINT
ALL INDEX
EXIT SELECT GO
Operation guide
PRINTPAPER
SIZE BORDERLESS
STANDARD STANDARD
CANCEL SELECT GO
OK
OK