Checking The Image Processing Function (Pixel Mapping); Adjusting The Brightness Of The Monitor - Olympus FE-120 Advanced Manual

Checking the image processing function
(PIXEL MAPPING)
The pixel mapping feature allows the camera to check and adjust the CCD and
image processing functions. It is not necessary to operate this function frequently.
Approximately once a year is recommended. Wait at least one minute after taking
or viewing pictures to allow for proper performance of the pixel mapping function.
Top menu [MODE MENU]
1
When [START] is displayed,
press Z.
• The [BUSY] bar is displayed during
pixel mapping. When pixel mapping is
finished, the screen returns to the
mode menu.
Note
• If you turn the camera off during pixel mapping, start again from Step 1.

Adjusting the brightness of the monitor

This function lets you adjust the brightness of the monitor to make it easier
to see the image.
Top menu [MODE MENU]
• In : Top menu
1
Adjust the brightness while
looking in the monitor, and when
you have set the desired level,
press Z.
• Pressing a brightens the monitor, and
pressing c darkens it.
[SETUP] [PIXEL MAPPING]
g"How to use the menus" (P. 16)
[SETUP] [s]
g"How to use the menus" (P. 16)
[SETUP] [s]
PIXEL MAPPING START
s
X
s
SELECT SELECT SELECT GO GO GO
OK OK OK
6
75