Useful Features; Ch-Setting - Sharp aquos lc-15s4u Operation Manual

Useful Features
---------
GIIR.
•••
• ••
®ID • •
SLEEP
o
G1S~ 0
R~~I·'MENU
o
~
•
AUDIO
MUTE ONLY CC INPUT
0 0 0 0
EZ SETUP
A I R.l CA B L E
CH SEARCH
CH . MEMORY
Repeat steps
1
to
3
of
Saving broadcast TV channels
in the memory.
Press £/T to move the cursor to "SKIP", and use ....
/~
to select "ON" or "OFF".
Press MENU to exit.
Press £/T to select "CH MEMORY", and press
ENTER.
Press ./T to move the cursor to "CHANNEL", and use
....
/~
or
Channel Select
to select the desired channel to
be added or erased.
~STEREO
SAP
MONO
EZ SETUP
AI·R.IC
ABLE
CH
SeARCH
CH MEMORY
Press ENTER. The tuner will search through all available
channels in your area and add them to the TV memory.
2
Press ....
/~
to select "SETUP".
Press ./"'" to select "CH SEARCH", and press ENTER.
Press MENU to display the Menu screen .
Press ./"'" to select "CH-SETTING", and press ENTER.
Individual settings of programs can be adjusted.
• Adding weak or additional channels or erasing
unwanted channels from TV memory
I
NOTE
>
• To interrupt CH SEARCH, press MENU RETURN. CH SEARCH will
stop at the current channel and will not add any higher channels .
• Saving broadcast TV channels in the memory
SLEEP
o
d!$I:~
0
:~~I·'MENU
_
~::./-'
e
EZ seTUP
AIR/CABLE
CH
SEARCH
CH.···· MEMORY
Press MENU to exit.
Press
.6./T
to select "AIR/CABLE", and press ENTER.
Press £/T to select the desired setting, and press ENTER.
Press £/T to select "CH-SETTING", and press ENTER.
Press ....
/~
to select "SETUP".
Press MENU to display the Menu screen.
CH·SETTING
I
NOTE
>
• Receivable channels of the LCD TV set are:
AIR channels: CABLE channels:
VHF: 2 through 13. 1 (HRC and IRC)
UHF: 14 through 69. 2 through 125 (STD, HRC and IRC)
• EZ SETUP
When you move to an area with different broadcasting
signals, you may have to set the channel numbers and
the time with the EZ SETUP function. To activate EZ
SETUP, perform the following procedure.
CD
Press AI. to select "CH-SETTING" in the SETUP screen (see
page 17), and press ENTER.
®
Press AI. to select "EZ SETUP", and press ENTER.
@ Press AI. to select "YES", and press ENTER.
Refer to page 12 for more information on EZ SETUP.
• Setting the AIR/CABLE
It is necessary to set the receiving mode to AIR or CABLE
channels to receive locally broadcast TV programs.
I
NOTE
>
• If CH SEARCH is performed again, the previously memorized
channels will be lost.
<@
21