Olympus E-620 Instruction Manual page 54

x
Notes
• When multiple exposure is set, [SLEEP] is set to [OFF] automatically.
• RAW images taken with another camera cannot be used for the overlay image.
• When [OVERLAY] is set to [ON], the images displayed when a RAW image is selected are
developed with the settings at the time of shooting.
• To set the shooting functions, cancel multiple exposure shooting first. Some functions cannot
be set.
• Multiple exposure is cancelled automatically in the following situations.
The camera is turned off/The q button is pressed/The battery power runs out/The card
cover is opened/The card is replaced/The LCD monitor is closed/The USB cable is inserted
• The information for the first frame during multiple exposure shooting is displayed as the
shooting information.
• When a RAW image is selected using [OVERLAY], the JPEG image for the image recorded
2
in JPEG+RAW is displayed.
• When shooting multiple exposures using bracketing, priority is given to multiple exposure
shooting. While the overlay image is being saved, bracketing is reset to the factory default
setting.
54
EN