Olympus E-620 Instruction Manual page 33

Playback
Displaying the image after
the picture is taken
Displaying the image after
the picture is taken and
deleting unneeded images
Checking whether the
subject is in focus
Quickly searching for the
desired image
Viewing images on a TV
Comparing images
Settings
Saving the settings
Changing the menu
display language
Not all the functions are
reset to the factory default
settings by [RESET]
Set [REC VIEW]. You can set the number of seconds
that the image is displayed.
Set [REC VIEW] to [AUTO q]. After you take a picture,
the camera switches to playback mode automatically,
allowing you to delete the image.
Use close-up playback to check whether the subject is in
focus.
Use index display to search from a index of between 4
and 100 frames.
Use calendar display to search by the date the picture
was taken.
Use the video cable to play back recorded images on
your TV. You can also view the images as a slideshow.
You can use light box display to display two frames side-
by-side.
You can play back another image without changing the
magnification.
You can register two camera settings in [CUSTOM
RESET]. Even if the settings are changed, they can be
returned to their registered settings by resetting the
settings.
You can register up to two current camera settings in
[MY MODE SETUP]. Assign My Mode to the < button
so that you can easily use that function during shooting.
You can change the display language.
The following functions are not returned to the factory
default settings by [RESET]. Use the menu to change
the respective settings. You can check the default
settings in the "Menu directory" (gP. 137).
RESET1, RESET2 (Custom reset)/PICTURE MODE/
X/W/s/DIAL FUNCTION/DIAL DIRECTION/
MY MODE SETUP/VIDEO OUT/ISO-AUTO/WB/
dpi SETTING/r/p/EDIT FILENAME/
AF FOCUS ADJ./EXPOSURE SHIFT/
f WARNING LEVEL
P. 93
P. 93
P. 82
P. 84
P. 84
P. 87
P. 83
P. 82
P. 94
P. 98
P. 93
P. 94,
P. 136
33
EN