Olympus DIGITAL CAMERA TG-805 Instruction Manual page 58

Recording the shooting location and time information on the images shot Recording the shooting location and time information on the images shot
[GPS Settings] [GPS Settings]
t (Settings 3)
GPS (Global Positioning System) is a system that locates current positions (latitude and longitude) by receiving signals
from satellites. This camera ties in the location information with data and map data, and makes it possible to record the
shooting direction and landmark information on the images.
GPS is subject to the laws of the country or region concerned. Be absolutely sure to comply with these laws.
Set the GPS function to [Off] inside airplanes and other places where use of the GPS function is prohibited.
While the GPS function is set to [On], it stays activated even if the camera's power is off so the battery power will
continue to be consumed.
Submenu 2
On
GPS
Off
Status
On
Country/Region
Off
On
State/Province
Off
On
City
Off
On
Landmark
Off
Only the landmark information registered near the shooting location is displayed.
Under some conditions of use, the GPS information may not be recorded accurately. Refer to "Concerning GPS"
(p. 73).
When GPS has been set to [On], the [Power Save] mode is automatically set to [Off].
The GPS information may not be recorded when the camera time has not been set or when settings have been
changed.
58 EN
For information on using the menus, see "Setup menu" (p. 6).
GPS Settings
Submenu 3
When the GPS function is going to be used.
When the GPS function is not going to be used.
When the location information screen is to be displayed.
When the country or region is to be displayed.
When the country or region is not to be displayed.
When the state or province is to be displayed.
When the state or province is not to be displayed.
When the city is to be displayed.
When the city is not to be displayed.
When the landmark is to be displayed.
When the landmark is not to be displayed.
Application
(TG-810 only) (TG-810 only)