Olympus DIGITAL CAMERA TG-805 Instruction Manual page 56

Olympus digital camera user manual
Hide thumbs Also See for DIGITAL CAMERA TG-805:
Table of Contents

Advertisement

Displaying the current altitude/water
Displaying the current altitude/water
depth (atmospheric/hydraulic pressure)
depth (atmospheric/hydraulic pressure)
[Manometer]
[Manometer]
t (Settings 3)
The readings may have a margin of error depending
on meteorological conditions. Use the readings only
for your reference.
Submenu 2
Submenu 3
Off
Manometer
On
Calibrate
m
m/ft
ft
When set to [On], a warning message appears in
the monitor as a water depth close to 7 m (22.9 ft) is
reached.
To adjust the altitude/water depth display
To adjust the altitude/water depth display
1 Use FG to select the current altitude/water depth,
and press the A button to set.
56 EN
For information on using the menus, see "Setup menu" (p. 6).
Manometer
Application
Cancels the manometer
display.
Displays the current
altitude/water depth
(atmospheric/hydraulic
pressure) in the shooting
standby mode screen.
(–10 m to 5,000 m)
Proceed to the setting
screen. See below.
This displays in meters.
This displays in feet.
Calibrate
1200 m
1200 m
Exit
MENU
Operating the camera by tapping the
Operating the camera by tapping the
body [Tap Control]
body [Tap Control]
t (Settings 3)
Submenu 2
Off
On
Calibrate
Operating during shooting mode
Operating during shooting mode
(Example: Flash mode)
(Example: Flash mode)
1 Tap the right or left side of the camera body once.
Then tap the top side of the camera once.
The fl ash mode selection screen is displayed.
2 Tap the right or left side of the camera body to select a
function.
3 Tap the back of the camera body twice to confi rm your
selection.
Tap the camera fi rmly using the pad of your fi nger.
When the camera is stabilized on a tripod for
example, tap control may not work properly.
To prevent dropping the camera when using tap
control, strap the camera to your wrist.
Set
OK
Tap Control
Application
Cancels [Tap Control].
[Tap Control] is activated.
Adjusts the tap strength and
intervals between multiple taps
on each side of the camera body.
(top, left, right, & back)
Flash Auto
Flash Auto
4 4
14
N
M
ORM
P P
0.0
0.0
WB
WB
AUTO
AUTO
ISO
ISO
AUTO
AUTO
MENU
MENU

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tg-810

Table of Contents