Olympus DIGITAL CAMERA TG-805 Instruction Manual page 55

Setting the date and time [X Setting the date and time [
X
t (Settings 3)
"Date, time, time zone, and language" (p. 18).
To select the date display order To select the date display order
1 Press I after setting Minute, and use FG to select
the date display order.
Date order
2 Press the A button to set.
To check the date and time To check the date and time
Press the E button while the camera is turned off. The
current time is displayed for approx. 3 seconds.
Choosing home and alternate time Choosing home and alternate time
zones [World Time] zones [World Time]
t (Settings 3) World Time
You will not be able to select a time zone using
[World Time] if the camera clock has not fi rst been set
using [X].
For information on using the menus, see "Setup menu" (p. 6).
X ] ]
X
Y M D Time
. . :
2011 02 26 00 00
Y / M / D Y / M / D
Cancel Set
MENU OK
Submenu 2 Submenu 3
x
Home/
Alternate
y
—
*1
x
—
*1, 2
y
In areas where daylight saving time is in effect, use
*1
FG to turn daylight saving time ([Summer]) on.
When you select a time zone, the camera automatically
*2
calculates the time difference between the selected
zone and the home time zone (x) to display the time in
the travel destination time zone (y).
Restoring data in the camera Restoring data in the camera
[Data Repair] [Data Repair]
t (Settings 3) Data Repair
Playback will become available by performing [Data
Repair] when the Photo surfi ng function is not
activated properly. However, data such as collections
and other groups created with the ib (PC software) is
deleted from the database in the camera.
Import the data back into the camera from a computer
to playback the data created with the ib (PC software).
Application
The time in the home
time zone (the time zone
selected for x in submenu
2).
The time in the travel
destination time zone (the
time zone selected for y in
submenu 2).
Select the home time zone
(x).
Select the travel destination
time zone (y).
EN
55