1
Press d (#).
• The current flash setting is displayed.
2
Press d (#) to change the flash
mode to your desired setting.
• Each time you press d, the flash mode
changes in the following sequence:
"Auto-flash" - "! Red-eye reduction
flash" - "# Fill-in flash" - "$ Flash off".
3
Press the shutter button halfway.
• In conditions where the flash will fire, #
lights (flash stand-by).
4
Press the shutter button fully to
take the picture.
TIPS
The # (flash charge) mark blinks.
→ The flash is charging. Wait until the # mark lights continuously.
Note
• The flash does not fire in the following situations:
Sequential shooting, super macro, or panorama.
• The flash may not give you the optimum result in macro mode with the zoom
set to wide-angle (W). Check the resulting picture on the monitor.
Flash shooting
# mark
35
3