RM-313
BB Troubleshooting and Tuning Guide
4. Click Close to end the lights testing.
Switching shutter key lighting ON using Phoenix
Prerequisites
First go through steps 1-5 in
Steps
1. From Target partition, select SIDELED3.
2. From State partition, select On.
3. Set Level to 100 and click Write.
4. Click Close to end the lights testing.
Switching shutter key lighting OFF using Phoenix
Prerequisites
First go through steps 1-5 in
Steps
1. From Target partition, select SIDELED3.
2. From State partition, select Off.
3. Set Level to 0 and click Write.
Issue 1
Switching display lighting ON using Phoenix (page 3–49)
Switching display lighting ON using Phoenix (page 3–49)
COMPANY CONFIDENTIAL
Copyright © 2007 Nokia. All rights reserved.
if not done yet.
if not done yet.
Page 3 –55