Erasing Pictures - Olympus Camedia C-360 Zoom Basic Manual

x215_Basic.book 35 ページ ２００３年１２月１１日 木曜日 午前９時１６分

ERASING PICTURES

This function enables you to erase recorded pictures. You can choose the
single-frame erase or the all-frame erase.
• You cannot erase pictures that are protected. Cancel the protection
before erasing such pictures.
Note
• Once erased, pictures cannot be restored. Be careful not to
accidentally erase pictures you want to keep.
Single-frame erase
This function erases only the picture displayed on the monitor. The all-frame
erase function can be used to erase all the pictures on the card at once.
1
Press with the lens barrier closed.
• The monitor turns on.
2
Use the arrow pad to display the picture you want to
erase.
3
Press .
• The top menu is displayed.
4
Press to select
5
Press to select YES, and press
• The picture is erased and the menu is closed.
All-frame erase
1
In the playback mode top menu, select MODE MENU →
CARD → CARD SETUP, and press
2
Press to select
3
Press to select YES, and press
• All the pictures are erased.
ERASE.
.
ALL ERASE, and press
.
.
.
En 35
En