Setting Time Interval before Stand-by (In the Shooting Modes)
The power save function puts the camera into the stand-by mode automatically if the camera is not operated for a set time using
the procedure below. The camera also enters the stand-by mode when viewing images as well as when taking pictures. To resume
viewing images this case, simply press the ON/OFF button.
1
2
3
4
Setting Monitor Brightness
The procedure below explains how to set LCD monitor brightness.
1
2
3
4
E-76
1
Set the mode dial to "P", "A" or "M".
2
Press the [
] button.
The first menu will appear on the LCD monitor.
3
Align the cursor with
dial.
4
Select [SLEEP] with the right point of the jog dial.
5
Select the interval before entering into the stand-by mode with
the top/bottom point of the jog dial.
6
Press the [OK] button.
Operating the shutter release button, zoom lever, or power button
reactivates the camera.
MEMO
• Power is not automatically shut off when using a separately sold AC
adapter.
• The power is automatically shut OFF after the predetermined interval
in stand-by mode.
1
Set the mode dial to
2
Press the [
] button.
The first menu will appear on the LCD monitor.
3
Align the cursor with
dial.
4
Press the right point of the jog dial to move to the setting mode.
5
Press the right / left points of the jog dial to select brightness.
:Makes brighter
:Makes darker
6
When the LCD monitor attains the desired brightness, press the
[OK] button.
with the top / bottom point of the jog
.
with the top / bottom point of the jog