Olympus C-200 ZOOM Reference Manual page 81

Settings retained after power is turned off
After the power is turned off, some user settings will be retained in the
camera's memory, but others will return to their factory defaults.
The chart below shows the available settings from this menu:
Group Item
Spot metering
Exposure
compensation
Shooting
ISO sensitivity
Digital zoom
White balance
Record mode
Image
Sharpness
Contrast
Rec view
File naming
Clear settings
Settings
Beep sound
Date & time
Monitor
adjustment
The icons in the "Memory" column are designated as follows:
: The setting remains until it is changed.
: Turning the power off normally returns the camera's settings to their
default values. To allow the settings for a particular setting group to be
maintained even when the camera is turned off, set the clear settings
function for that group to OFF (p.98). However, removing the power
supply from the camera will return the settings to their default values
even if the clear settings function is set to OFF.
CAUTION
• If the batteries are removed and left out of the camera, or if the batteries
run down, the settings will return to their defaults.
Possible Settings
(ESP) SPOT
+2.0 +1.5 +1.0 +0.5 (0) –0.5 –1.0 –1.5 –2.0
(AUTO) 100 200 400
(OFF) ON
(AUTO)
TIFF SHQ (HQ) SQ
HARD (NORMAL) SOFT
HIGH (NORMAL) LOW
(OFF) ON
(NAME RESET) AUTO FILE
(RESET) HOLD
(ON) OFF
(January 1 2001 00:00)
(Set to the midpoint of the adjustment bar)
* The default settings are indicated in parentheses.
Memory
5
71