Olympus Stylus 740 Instruction Manual page 60

Monitor indication
NO INK
JAMMED
SETTINGS
CHANGED
PRINT ERROR
r
CANNOT PRINT
Functions available in shooting modes and scenes
Some functions cannot be set in certain shooting modes. For more details, refer to the table below.
Grayed out areas (
mode, there are restrictions to the functions that can be set. g "Functions with restrictions in
shooting scenes (applies to both Stylus750/µ750 and Stylus740/µ740)" (P. 61)
Functions available in shooting modes
Stylus750/µ750
Shooting mode
Function
F
Flash
&/%
Y
Image stabilizer
Optical zoom
WB
ISO
DRIVE
ESP/n
IMAGE QUALITY
SILENT MODE
DIGITAL ZOOM
AF MODE
R
PANORAMA
60
EN
Possible cause
The printer has run out of ink. Replace the ink cartridge in the printer.
The paper is jammed.
The printer's paper tray has
been removed or the printer
has been operated while
changing settings on the
camera.
There is a problem with the
printer and/or camera.
Pictures recorded on other
cameras may not be printed
on this camera.
) in the s column indicate that to enable the shooting scene in s
P
Corrective action
Remove the jammed paper.
Do not operate the printer while changing
settings on the camera.
Turn off the camera and printer. Check the
printer and remedy any problems before
turning the power on again.
Use a computer to print.
K
s
AUTO
—
—
—
—
—
—
—
—
n
—
—
—
—
—
—
—