Olympus Stylus 740 Instruction Manual page 59

When you get an error message on the camera...
Monitor indication
q
There is a problem with the
card.
CARD ERROR
q
Writing to the card is
prohibited.
WRITE-PROTECT
>
The internal memory has no
available memory and
MEMORY FULL
cannot store any new data.
q
The card has no available
memory and cannot store
any new data.
CARD FULL
L
There are no pictures in the
internal memory or on the
NO PICTURE
card.
r
There is a problem with the
selected picture and it
PICTURE ERROR
cannot be played back on
this camera.
r
If pictures taken by other
cameras are selected, they
THE IMAGE
cannot be edited.
CANNOT BE
EDITED
The battery compartment/
card cover is open.
CARD-COVER
OPEN
g
The battery is empty.
BATTERY EMPTY
This card cannot be used in
C A R D SE TU P
this camera. Or, the card is
not formatted.
POWER OFF
FORMAT
SET OK
There is an error in the
M EM ORY SE TU P [ I N ]
internal memory.
POWER OFF
MEMORY FORMAT
SET
OK
The camera is not connected
to the printer correctly.
NO CONNECTION
There is no paper in the
printer.
NO PAPER
Possible cause Corrective action
This card cannot be used. Insert a new
card.
The recorded image has been protected
(read-only) on a computer. Download the
image to a computer and cancel the read-
only setting.
Insert a card or erase unwanted data.
Before erasing, back up the data of
important pictures using the card, or
download such pictures to a computer.
Replace the card or erase unwanted data.
Before erasing, download important pictures
to a computer.
The internal memory or the card contains
no pictures.
Record pictures.
Use image processing software to view the
picture on a computer. If that cannot be
done, the image file is damaged.
Use image processing software to edit the
pictures.
Close the battery compartment/card cover.
Charge the battery.
Format the card or replace.
• Select [POWER OFF] and press o.
Insert a new card.
[YES] and press o.
• Select [FORMAT]
All data on the card is erased.
Select [MEMORY FORMAT]
press o . All data in the internal memory is
erased.
Disconnect the camera and connect it again
correctly.
Load some paper in the printer.
[YES] and
59
EN