Olympus Stylus 740 Instruction Manual page 30

MEMORY FORMAT (FORMAT)
All existing data, including protected pictures, are erased when the internal memory or card is
formatted. Make sure that you save or transfer important data to a computer before formatting the
internal memory or card.
• Make sure there is no card inserted in the camera when formatting the internal memory.
• When the internal memory is formatted, the data of the frames and labels downloaded with the
provided OLYMPUS Master software will be deleted.
• Be sure that the card is inserted in the camera when formatting the card.
• Before using non-Olympus cards or cards which have been formatted on a computer, you must format
them with this camera.
BACKUP
................................................. Copying pictures in the internal memory to the card
Insert the optional card into the camera. Copying data does not erase the picture in the internal memory.
• It takes some time to back up data. Check if the battery is not empty before starting the copy, or use
the AC adapter.
W
............................................................................................... Selecting a display language
You can select a language for on-screen display. Available languages vary depending on the area
where you purchased this camera.
You can add other languages to your camera with the provided OLYMPUS Master software.
QUICK VIEW
......................Setting to allow you to view pictures immediately after shooting
OFF /ON
When this is set to [ON], pressing < while in shooting mode displays the last picture taken on the
monitor. (The same operation can be performed as in playback mode.)
PW ON SETUP
............................................................. Setting the startup screen and volume
SCREEN OFF (No picture is displayed.)
VOLUME OFF (No sound)
[VOLUME] can not be adjusted when:
• [SCREEN] is set to [OFF].
• [SILENT MODE] is set to [ON].
• [MUSEUM] is activated.
SCREEN SETUP
.................................................. Registering a picture as the startup screen
Still pictures in the internal memory or the card can be registered to screen [2] for [PW ON SETUP].
If a picture is already registered, the [IMAGE EXISTING] screen is displayed asking if you want to
cancel the currently registered picture and register a new one.
COLOR
............................................................................ Setting the color of the menu screens
NORMAL /BLUE
BEEP
......................................... Adjusting the volume of the beep when buttons are pressed
OFF (No sound) /
30
EN
................................... Formatting the internal memory or card
/ LOW
/BLACK / PINK
LOW / HIGH
/ 1 / 2 (The picture registered with
[SCREEN SETUP] is displayed.)
/ HIGH