Understanding Auto Ta And Eq Error Messages - Pioneer avh-p7950dvd Operation Manual

Hide thumbs Also See for avh-p7950dvd:
Table of Contents

Advertisement

Appendix
Additional Information
Message
THERMAL PROTECTION IN
MOTION (TEMP)
FILE Skipped
PROTECT

Understanding auto TA and EQ error messages

When correct measurement of car interior acoustic characteristics is not possible using the auto
TA and EQ, an error message may appear on the display. If an error message appears, refer to the
table below to see what the problem is and the suggested method of correcting the problem. After
checking, try again.
Message
Error. Please check MIC.
Error. Please check front SP.,
Error. Please check FL SP.,
Error. Please check FR SP.,
Error. Please check center SP.,
Error. Please check rear SP.,
Error. Please check RL SP.,
Error. Please check RR SP.,
Error. Please check rear center
SP., Error. Please check sub-
woofer.
Error. Please check noise.
Downloaded from Caradio-Manual.com Manuals
120
En
Cause
The temperature of this unit is out-
side the normal operating range
The inserted disc contains WMA
files that are protected by DRM
All the files on the inserted disc are
secured by DRM
Cause
Microphone is not connected.
The microphone cannot pick up the
measuring tone of a speaker.
The surrounding noise level is too
high.
Action (See)
Wait until the unit's temperature returns to
within normal operating limits.
! Play an audio file not protected by DRM.
! Replace disc.
Replace disc.
Action
Plug the supplied microphone securely into
the jack.
! Confirm that the speakers are connected
correctly.
! Correct the input level setting of the power
amp connected to the speakers.
! Set the microphone correctly.
! Stop your car in a place that is as quiet as
possible, and switch off the engine, air condi-
tioner or heater.
! Set the microphone correctly.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents