Removing And Installing The Video Card - Clevo P170HM Service Manual

Disassembly

Removing and Installing the Video Card

Figure 16
Video Card
Video Card Removal Procedure
Removal Procedure
Turn off the computer, turn it over and remove the battery
1.
Remove screws
2.
a. Remove the screws in
1 last)
the correct order.
Carefully (they may be hot) remove the heat sink units
3.
b. Carefully remove the
Remove screws
4.
heat sink units.
Remove the video card
5.
c. Remove the video card
a.
screws. The video card
will pop up.
d. Remove the video card.

Caution
The heat sink, and video
card area in general,
contains parts which are
subject to high tempera-
b.
tures. Allow the area
time to cool before re-
moving these parts.

8 & 9.Heat Sink Units
12. Video Card
• 9 Screws
2 - 20 Removing and Installing the Video Card
- from the heat sink unit in the order indicated on the label (i.e screw 7 first through to screw
1 7
(Figure 16a)
.
&
from the video card and the video card
10 11
(Figure 16d)
12
c.
3 2
1 4
6
7
5
8
(page 2 - 5) and component cover
& (Figure 16b)
8 9
will pop up
12
.
c.
10 11
9
d.
d.
9
15
12
(page 2 - 10)
.
.
.
(Figure 16c)
12
Note:
Please use a flat head screwdriver to
remove screws & .
10 11

Heat Sink Screw Removal
and Insertion
Remove the screws from the
heat sink in the order indicated
here: 7-6-5-4-3-2-1.
When tightening the screws,
make sure that they are tight-
ened in the order: 1-2-3-4-5-6-7.