Removing The Hard Disk Drive - Clevo P170HM Service Manual

Disassembly

Removing the Hard Disk Drive

Figure 2
HDD Assembly
The hard disk drive can be taken out to accommodate other 2.5" serial (SATA) hard disk drives with a height of 9.5mm
Removal
(h). Follow your operating system's installation instructions, and install all necessary drivers and utilities (as outlined in
Chapter 4 of the User's Manual) when setting up a new hard disk.
a. Locate the HDD bay
cover and remove the
Hard Disk Upgrade Process
screws.
b. Remove the hard disk
1. Turn off the computer, and remove the battery
bay cover by levering the
2. Locate the hard disk bay cover and remove screws
cover at point .
3
3. Remove the hard disk bay cover
a.

4.Hard Disk Bay Cover
• 2 Screws
If you have access to the internet, download the latest application and hardware driver updates for the operating system you plan
2 - 6 Removing the Hard Disk Drive
(page 2 -
by levering the cover at point
4
6
1
3
2
HDD System Warning
New HDD's are blank. Before you begin make sure:
You have backed up any data you want to keep from your old HDD.
You have all the CD-ROMs and FDDs required to install your operating system and programs.
to install. Copy these to a removable medium.
5).
)
- (Figure 2a .
1 2
)
(Figure 2b .
3
b.
3
4
