Set Up The Camera With Two Monitors Or A Projector - Polycom picturetel 900 series Installation Manual

Set Up the Camera with Two Monitors or a Projector

• If you have a dual-monitor system, you must place the camera on top of the NTSC/PAL monitor (not on the
SVGA/XGA monitor), and if the NTSC/PAL monitor is on a cart, you must place the computer box in that
cart.
Once you've placed the camera and computer box, you can connect the camera and audio cables as
described on the previous pages (refer to the page that corresponds to your system's configuration). If your
NTSC/PAL monitor uses an S-video cable, the cabling typically looks like this:
S VIDEO
See the PictureTel 900 Series Collaboration System Administrator's Guide for complete information.
• If you have a projector, see the documentation that you received with the projector for information about
connecting the cables.
4
2
7
A/V
20
o
8
1
A
8
1
4
2
1
7
4
ISDN
VCR A/V WAN LAN
VGA