Care And Troubleshooting; Routine Care - Minelab F3 compact Operation Manual

5.

Care and Troubleshooting

5.1

Routine Care

The F3 COMPACT is designed for lasting use in harsh operating
environments, however, proper care and maintenance will ensure
long-term reliability. Key to ensuring the durability of the F3
COMPACT is the correct stowage of the detector whenever it is
not in use. Additionally, operators of F3 COMPACT detectors
should be aware of the following:
a. During rest periods, wherever possible, the detector should be
sheltered from direct sun, rain, snow etc.
b. On completion of operations, with the F3 COMPACT fully
extended, all shafts should be wiped with a damp cloth to
remove any dirt or dust before collapsing the shafts.
c. Do not use solvents or chemicals to clean the F3 COMPACT.
If any part of the detector comes into contact with corrosive
substances (including salt water), wash the detector with clean
fresh water and dry with a clean cloth.
d. Ensure the F3 COMPACT is dry before stowing in the Soft
Carry Bag.
e. Ensure
Compartment before stowing the detector.
f. The Skid Plate is designed to protect the coil and may require
replacement after long periods of use. There is no requirement
to remove the Skid Plate to clean the inside during routine
maintenance. To replace the Skid Plate, remove the original
using fingers to lever it from the coil, then push the
replacement Skid Plate onto the coil (see Figure 26).
the batteries
F3 COMPACT Version 2 Operations Manual
are removed
37
from the Battery