Seat Lock; Fuel Tank Cap - Sym HU05 Series Instruction Manual

7. Use of Each Component
Turn Signal Switch：
Turn signal lights are used when turning left/right or changing lane.
Turn ignition switch to "
will flash.
To release, simply return the turn signal light button to the original position.
Right-side turn signal light flashing means you intend to make a right turn.
Left-side turn signal light flashing means you intend to make a left turn.
Seat Open Switch：(option)
Turn ignition switch to "
Horn Switch：
Press this button, when ignition switch is in the "
CAUTION：
Do not press this button when you are in the area where there's no honking.

SEAT LOCK

Unlock：
1. Insert the ignition switch key into lock located under seat left (front) and turn to right to unlock.
2. Press the seat open switch (SEAT OPEN)。
Lock：
Press the seat down and it will be locked automatically.
After the seat has been locked, check to make sure it has been locked properly by lightly lifting the seat.
CAUTION：
Be sure to remove the key after the seat has been locked.
Do not put the key inside the storage box after unlocking to avoid the key being locked inside the
storage box when the seat is pressed down automatically.

FUEL TANK CAP

1. Insert ignition switch key into the ignition
switch, and turn the key to the left, then the
cap can be removed.
2. Do not fill above the fuel upper limit when
refueling.
3. Turn the fuel tank cap right, and simply
push the fuel tank cap. Fuel tank cap can
be locked.
", and slide the turn signal switch to left or right. Then, the turn signal lights
" position and press this button down. Then, the seat can be open.
" position, the horn will sound.
9