Pioneer RCS-LX60D Operation Instructions Manual page 65

Making changes to your GUIDE Plus+ setup
1 Select 'Setup' from the Menu bar.
k 69 ページ ２００７年４月２４日 火曜日 午後７時５８分
Plus+® recording
le' from the Menu bar.
2 Highlight the part you want to change.
日 火曜日 午後７時５８分
Press the GREEN Action button to go to continue, or the
RED Action button to go back.
t and
4 Enter a name for the scheduled recording.
Action button (VIDEO Plus+).
You can change the Language, Country, Postal Code
er buttons to enter a PlusCode
and the External Receiver settings.
mber.
3 Press ENTER to confirm.
Manual Host Channel setup
Please enter the PlusCode programming number and press
ENTER to confirm.
The GUIDE Plus+ system will automatically identify your
ding, or
Host Channel as soon as the recorder is put into standby
for the first time. See the table on page 60 for a list of all
the European Host Channels.
rding.
If you know your Host Channel details (source and
programme number) or if the automatic identification
e keywords for a search
did not provide the expected result, you can identify your
standard categories, you can also set
Host Channel manually. Select Host Channel Setup in
ds.
the Setup area and follow the instructions on the TV.
Use the / / /
Select the correct source (e.g., internal tuner or external
characters from the on-screen keyboard.
receiver) and enter the respective programme number
After entering the whole name, press the GREEN Action
(e.g., if you have to press 9 on the remote to watch your
ess My Choice.
area not yet covered by the GUIDE
button to continue.
Host Channel, enter 9 as the programme number). When
ou may also have to input a channel
you next switch the recorder into standby the GUIDE
the on-screen display to do this.
5 Highlight the right recording tile.
04
Plus+ system will complete the Host Channel setup.
o confirm.
6 Press the RED Action button (Quality) to change
Note
the recording quality.
1 Making changes to the Country or Postal Code settings may require a new download of TV listings information. This can take up to 24 hours.
Downloaded From TheatreSystem-Manual.com Manuals
gs, skip
Press ENTER to access the Basic Setup screen.
Basic Setup
Host Channel Setup
GUIDE Plus+ System Information
Setting a manual recording
1 Select 'Schedule' from the Menu bar.
2 Press the GREEN Action button (Manual).
3 Use the number and / / /
the recording date, then press the GREEN Action
button (Next).
buttons followed by ENTER to select
4 In the same way, enter the recording start time,
followed by the GREEN Action button (Next) to
confirm.
5 Enter the recording end time in the same way,
followed by the GREEN Action button (Next) to
confirm.
You can reset the Host Channel settings at any time back
to the default setting of automatic. Please be aware that
resetting the Host Channel will erase all TV listings data.
GUIDE Plus+ FAQ and
troubleshooting
This FAQ covers only a few questions. For a complete list
please consult the GUIDE Plus+ website at:
www.europe.guideplus.com
FAQ
• When I tried setting up my external receiver I could not
get any of the attempts to work, what should I do?
There could be several reasons why your external
receiver could not be controlled.
– The connections could be wrong. Make sure that
the G-LINK cable is connected to the G-LINK
connector on the recorder and the IR blaster is in
front of the external receiver, pointing towards the IR
receiver of your external receiver. See Connecting to a
cable box or satellite receiver on page 51.
– The code that is listed under your brand could be
wrong. Please try other codes for your brand under
satellite, cable or terrestrial. Go to the Setup Area and
choose one of the three options (cable, satellite or
terrestrial) that you have not already tried. Follow the
on-screen prompts to make sure that the GUIDE
Plus+ system can change channels on your external
receiver. If it does not work, repeat the process,
choosing different reception and external receiver
1
combinations until you have tried all the codes for
buttons to enter
your brand of receiver that are already in the GUIDE
Plus+ system. If it still does not work, see below on
how to receive new codes overnight.
– The unit has not yet received new codes. The nightly
data downloads frequently include new codes for
controlling external receivers. Please tune your
external receiver to your local host channel and leave
it on overnight. Switch this recorder into standby. The
next morning, please perform the GUIDE Plus+
setup again to see if your external receiver can now
be controlled.
– The external receiver that you use is currently not
supported. If, after leaving your external receiver on
overnight, and doing the Reception and External
Receiver Setup again, it still does not respond, please
call Customer Support to report your brand and
model.
En