Pioneer RCS-LX60D Operation Instructions Manual page 32

Problem
Can't operate using the remote
control.
6 ページ ２００７年４月２４日 火曜日 午後７時５７分
Tuner
Problem
0
Considerable noise in radio
tional information
broadcasts.
火曜日 午後７時５７分
tant
green functions on the remote, move the
Auto tuning does not pick up
ch from MAIN to SUB .
some stations.
Error Messages
+ +
SETUP SETUP / TUNE SR
ONE TOUCH COPY
1 1 2 2 3
Message
- +
ENTER ENTER
/ ST / ST PAUSE LIVE TV
4 4 5 5 6 6
2CH ONLY
-
F. S. SURR / TUNE TEST TONE VIDEO IN
7 8 8 9
SURROUND ADVANCED SOUND MENU
96K
s Using this unit with a Pioneer plasma
0
SLEEP CLEAR
JUKEBOX
EXIT
display
ers of vinyl-
utdoors.
NOISY
INPUT CHANNEL VOLUME DISPLAY
If you have a Pioneer plasma display
ERR MIC
SR+ cable
TEXT TV/DVD RDS DISP
ector to hook
TV CONTROL
of various convenient features, such as controlling this
MAIN MAIN SUB SUB
unit via the plasma display's remote sensor, automatic
ERR SP
video input switching of the plasma display, display unit
messages appearing on the plasma display screen, and
EEP ERROR
automatic volume muting on the plasma display.
the display
NO SPTYP
door antenna
e to dim the display if you find it too bright.
UP.
buttons to select DIMMER then
g the channel levels using
tone
buttons to select LIGHT or DARK
you can set the channel levels using a test
TER.
erence, rather than playing a source (see
oop antenna
l setting on page 31). A test tone is played
h speaker in turn, allowing you to adjust the
38
tting
ys.
AM LOOP ANTENNA
INPUT
TS-encoded CD, you will need to change
GITAL ANALOG
e channel level settings for stereo sources
TICAL)
hear the decoded signal.
L
dent of the settings for surround sound
R
e system into standby.
+ +
UP. SETUP / TUNE SR ONE TOUCH COPY
1 2 2 3
En
- +
buttons to select CD TYPE from the / ST ENTER ENTER / ST
PAUSE LIVE TV
Downloaded From TheatreSystem-Manual.com Manuals
4 5 5 6
ress ENTER.
-
/ TUNE
F. S. SURR TEST TONE TEST TONE VIDEO IN
information 7 8 8 9 9
buttons to select a setting, then
Remedy
• Replace the batteries (Putting the batteries in the remote control on page 21).
• Operate within 7 m, 30° of the remote sensor (Using the remote control on page 20).
• Remove any obstacles or operate from another position.
• Avoid exposing the remote sensor on the front panel to direct light.
• For operating the HDD/DVD recorder, make sure that the control cable and coaxial cable
are connected (page 10).
• If the receiver subwoofer is connected to a Pioneer plasma display with an SR+ cable,
check that the plasma display is switched on. Point the remote control at the plasma
display in order to operate the receiver subwoofer.
• Check that nothing is mistakenly plugged into the CONTROL IN jack.
Remedy
• Connect the AM antenna (refer to Connecting up on page 10) and adjust the direction
and position for best reception. You may also connect an additional internal or external AM
antenna (refer to Connecting external antennas on page 34).
• Fully extend the FM wire antenna, position for best reception, and secure to a wall. You
may also connect an outdoor FM antenna (see Connecting external antennas on page 34).
• DTS-CD – Use for playback of DTS-encoded CDs, but
• Turn off other equipment that may be causing the noise or move it further away.
note that the beginning of regular CD tracks may be
skipped.
• The radio signal is weak. Auto tuning will only detect radio stations with a good signal.
For more sensitive tuning, connect an outdoor antenna.
Setting the sleep timer
Description
• An operation is prohibited because it is only applicable to 2 channel sources, while the
current source is a multichannel source.
• An operation is prohibited because the source is 96 kHz digital.
• Appears when a menu is automatically exited after a set period of inactivity.
• Background noise is too high to complete MCACC setup successfully.
1
2
• An error occurred during MCACC setup because the microphone is not connected or is
to connect it to this unit and take advantage
not connected properly.
• An error occurred during MCACC setup because the speakers are not connected or are
not connected properly.
The sleep timer switches off the receiver subwoofer after
• Contact your Pioneer authorized service center or your dealer for servicing.
a specified time so you can fall asleep without worrying
• Try switching the unit off then on again. If the error still appears, please contact a
about it.
1
Pioneer authorized service center or your dealer.
1 Press the SLEEP button to select an option.
Choose between the following options:
CON T ROL IN
• SLP ON – Switches off after about an hour
• SLP OFF – Cancels the sleep timer
FM UNBAL 75 AM LOOP ANTENNA
MCACC
A UDIO INPUT
SETUP MIC CONTRO L IN
DIGITAL
After selecting SLP ON , you can press SLEEP again to
SPEAKERS
SYSTEM CONNECTOR CONTROL DVD/DVR1 DVD/DVR2 DIGITAL
(COAXIAL) (OPTICAL) (OPTICAL)
OUT SUBWOOFER R SURROUND L
check how much time is left. Each line indicates
approximately 12 minutes (remaining):
USE ONLY WITH DISPLAY UNIT.
SEE INSTRUCTION MANUAL.
R L
CENTER FRONT
AC IN
Resetting the system
Use this procedure to reset all system settings to the
factory default.
1 Switch the system on.
2 Press and hold SURROUND then press the
SURROUND ADVANCED SOUND MENU
0
SLEEP SLEEP CLEAR
JUKEBOX
INPUT CHANNEL VOLUME DISPLAY
TEXT TV/DVD RDS DISP
TV CONTROL
MAIN MAIN SUB SUB
, you can use an
2
ANALOG
L
R
S L P- - - - -
C ONTROL
OUT