Multitech MULTIMODEM MT5600ZDX Owner's Manual page 6

MT5600ZDX Owner's Manual
The MT5600ZDX is a desktop fax/modem for compatible IBM Personal
Computers that also provides support for answering machine and
voice mail capabilities. The MT5600ZDX provides dial-up
asynchronous communication capability with other personal
computers, terminals, on-line computer services or other types of
computer systems. Connection to the phone line and/or an attached
telephone device is made by RJ11 modular type connectors; the PC
connection is made via an RS232C/V.24 serial cable receptacle; and
low voltage DC power is supplied to the MT5600ZDX through a
modular power supply connection included with the modem. All these
connections are located on the rear of the MT5600ZDX. Hardware
installation procedures are described in Chapter 2.
General features include:
• Compliance with major ITU-T, TIA, and EIA international
standards to ensure compatibility with other modems.
• Distinguishes data, fax, or voice calls using DTMF and tone
detection with software packages supporting these features.
• Caller ID to identify your caller's phone number (available on U.S.
products).
Data
• Supports the K56flex
to 56Kbps, while maintaining compatibility with lower-speed
modems.
Note the K56flex standard asymmetrically transfers data--client
downloads at speeds up to 56K bps, client uploads at speeds up
to 33.6K bps.
• Supports the enhanced ITU-T V.34 standard, with data
transmission speeds to 33.6K bps, while also maintaining
compatibility with lower-speed modems.
• Supports asynchronous data rates at 56K, 33.6K, 31.2K, 28.8K,
26.4K, 24K, 21.6K, 19.2K, 16.8K, 14.4K, 12K, 9600, 4800, 2400,
1200, and 300 bps.
• Automatic fallback to slower speeds in noisy line conditions, and
fall-forward to faster speeds as conditions improve.
• ITU V.42 LAP-M and MNP Class 3 and 4 error correction.
• ITU V.42bis (4-to-1) and MNP 5 (2-to-1) data compression.
6
TM standard for data transmission speeds up