IBM Storwize V7000 Unified Quick Installation Manual page 57

Front of rails
Figure 19. Friction rail box contents.
If the slide rails in your rack installation kit came with shipping thumbscrews,
remove them before you begin the following installation procedure.
Follow these installation instructions:
1. Select an available 2U space in the rack to install the file modules.
Front
Upper U
(for 2U
to secure system
system)
Lower U
Figure 20. Locate a 2U space in the lower section of the rack.
2. Each slide rail is marked with either an R (right) or an L (left). Select one of the
slide rails and pull the rear bracket all the way back. If a thumbscrew is
installed in the slide rail, remove it.
Friction rail
(left)
M6 screws
Rear
Optional screw
into the rack
Pins
Chapter 2. Performing the hardware installation
Friction rail
(right)
37