Figure 11. Recommended rack locations
v Install both file modules in adjacent slots, near the control enclosure. Other
Step 5. Gather information
Gather system information, such as IP addresses, prior to system configuration and
initialization.
You need to have some information ready before you begin the initialization of
your system, such as the IP addresses. Refer to "Information required before
initializing your system" on page 12.
File Module
File Module
Control Enclosure
Expansion Enclosure 5
Expansion Enclosure 7
Expansion Enclosure 9
configurations are possible, but all racks must be close together to accommodate
cable lengths. A floor plan showing the layout must be developed prior to the
start of the installation.
11