NETGEAR R6300v2 User Manual page 75

To block services:

1. Select ADVANCED > Security > Block Services.
2. Select either Per Schedule or Always.
3. If you selected Per Schedule, specify a time period in the Schedule screen.
4. Click the Add button.
The Block Services Setup screen displays:
5. From the Service Type list, select the application or service to allow or block.
The list displays several common services, but you are not limited to these choices. To
add any additional services or applications that do not already appear, select User
Defined.
6. If you know that the application uses either TCP or UDP, select the appropriate protocol. If
you are not sure, select TCP/UDP (Both).
7. Enter the starting and ending port numbers.
If the application uses a single port number, enter that number in both fields.
8. Select the radio button for the IP address configuration you want to block, and enter the IP
addresses.
R6300v2 Smart WiFi Router
Security
75