NETGEAR R6300v2 User Manual page 101

2. Select ADVANCED > Wireless AP.
3. Select the Enable Access Point Mode check box.
The screen adjusts.
4. (Optional) If you want to manually assign a specific IP address to this router while it is in
AP mode, select the enable fixed IP setting on this device (not recommended) check
box.
5. Click the Apply button.
The IP address of the router changes, and you are disconnected. To reconnect, close
and restart your web browser, and type http://www.routerlogin.net.
R6300v2 Smart WiFi Router
Advanced Settings
101