Enabling/Disabling Protocols; Snmp Trap Configuration - Oki POCKET PRINT 6010E User Manual

Section IV - TCP/IP

Enabling/Disabling Protocols

To enable or disable protocols on the OkiLAN 6010e,
select the Protocols tab. Select each protocol you wish
to enable. If you disable a protocol, the OkiLAN 6010e
will no longer communicate using that protocol.

SNMP Trap Configuration

The SNMP Trap option allows configuration of traps.
Traps are unsolicited information concerning the
OkiLAN 6010e. Traps can be sent to an SNMP man-
ager or be broadcast to all hosts on the local segment.
To configure SNMP traps, select the SNMP Traps tab.
Note: SNMP options need to be configured only if you
are managing an OkiLAN 6010e or getting system
information using SNMP.
IV - 40 OKI OkiLAN 6010e User's Guide