Configuring The Okilan 6010E - Oki POCKET PRINT 6010E User Manual

Section IV - TCP/IP
2. Add the name and IP address to the "/etc/
hosts" file of each host that will access the
OkiLAN 6010e. Or, if your network uses a
name service, add the host name and IP
address to the name server.
Most TCP/IP networks use the Network Information
Service (NIS), Domain Name Service (DNS) or the "/
etc/hosts" database. See your network documentation
for instructions.

Configuring the OkiLAN 6010e

There are four utilities available to configure the
OkiLAN 6010e for TCP/IP printing. You may use
whichever utility is best suited for your needs.
OkiNet for TCP/IP – Windows TCP/IP
print manager utility. See Chapter 3 of this
section for more information.
OkiLAN 6010e Configuration Utility –
This utility is accessed via telnet. See Chap-
ter 5 of this section for more information.
In order to configure the OkiLAN 6010e via
telnet, you must first assign an IP address to
the OkiLAN 6010e and verify communica-
tion by pinging the device.
OkiNet for NetWare – This windows utility
must be run from a Novell NetWare client.
See Section III of this manual for specific
information.
IV - 10 OKI OkiLAN 6010e User's Guide