Timeout Checking - Oki POCKET PRINT 6010E User Manual

Section IV - TCP/IP
$ ftp OkiLAN 6010e_name<Enter>
Connected to OkiLAN 6010e_name.
220 ESI-2810 Version 3.0 ready.
Name (OkiLAN 6010e_name:anyone):<Enter>
230 User logged in.
ftp> binary<Enter>
200 Type set to I.
ftp> put chart.ps MPX1<Enter>
local: chart.ps remote: MPX1
200 PORT command successful.
150 Opening BINARY mode data connection for
MPX1.
226 Transfer complete.
4549 bytes sent in 0 seconds (4.4 Kbytes/s)
ftp> bye<Enter>
221 Goodbye.<Enter>
$

Timeout Checking

If timeout checking is enabled on the OkiLAN 6010e,
the OkiLAN 6010e will close any connection that stays
idle for more than five minutes. For example, if you
open an FTP connection to the OkiLAN 6010e and
walk away from your computer for more than five
minutes, the FTP connection will be closed. You can
reestablish a connection to the OkiLAN 6010e with the
OPEN command.
IV - 26 OKI OkiLAN 6010e User's Guide