Connection Test; Setting Status - Sanyo FW50C85T Owner's Manual

Proxy configuration
2
Use H I to Select Proxy configuration, then press OK.
3
Use H I to Select a setting, then press OK.
Network selection Proxy setting
Wireless network setting Proxy address
IP configuration Proxy port
Proxy configuration
Do not use is selected for default settings.
●
If you need to change the proxy setting as instructed by your
●
Internet service provider to set the designated proxy address and
port, select Use.
Do not use
Proxy setting
Use
Proxy address
*
Proxy port
*
* Items can be selected only when Proxy setting is set to Use.
Note(s)
The range of input numbers for the port number is between 0 and 65535. (If you enter a
●
number larger than 65535, it will be regarded as 65535.)
For proxy port, the selected ports may be blocked and not be able to use depending on your
●
network environment.
If the proxy address is entered with blank only, proxy server setting will be set to Do not
●
use.
Do not use
Use
Does Not use the proxy server.
Uses the proxy server.
Selects the number or word by
using H I J K, then press OK.
Use H I or the NUMBER buttons
to input numbers.

Connection test

Perform the following steps to Test your Internet connection after you
have connected an Ethernet Cable or entered Network Settings such as
IP Address, DNS Settings, etc. manually.
1
Use H I to Select Connection test, then press OK.
Connection Test will start automatically and the Test result for
●
Home Network and Internet will appear right after the Connection
Test finishes.
"Testing..." is displayed while the Connection Test is in
●
progress.
Home Network Internet
Pass Pass
Fail
-
Pass Fail
If the Connection Test for Internet passes, Speed Test will Start
●
Automatically.
2
Press OK to go to the list of Network Status Confirmation screen.
Note(s)
If the Connection Test for both Home Network and Internet Pass, you are ready to use Apps
●
or Network Upgrade Functions using the Internet without making any Additional Settings.
If the Connection Test fails, check if the Ethernet Cable is connected to this TV properly or
●
if you have entered All the required details for the Wireless LAN Connection properly.

Setting status

You can check the status of network settings.
1
Use H I to Select Setting status, then press OK.
Network setting list will be displayed.
●
MAC address of this unit will be displayed in the list.
●
41
Description
Connection Test is successfully
completed.
Connection Test for Home
Network failed. Check the
Connection Settings.
Connection Test for Internet failed.
Check the Connection Settings.
Continued on next page.
.
English