Hdmi Mode; Setting Your Location To Home - Sanyo FW50C85T Owner's Manual

Language
You can set the language for the On-screen display.
1
Use H I to Select Language, then press OK.
Language
Picture
Sound Preferences
Features Restore default settings
Installation
2
Use H I to Select English, Español or Français, then press OK.
Note(s)
If you need the English menu instead of the Spanish or French menu's, press Z.
●
Use J K to Select Configuración or Configuration, then press OK.
Use H I J K to Select Ajustes de TV or Réglages de la télévision, then press OK.
Use H I to Sselect Instalación or Installation, then press OK.
Use H I to Select Idioma or Langue, then press OK.
Use H I to Select English, then press OK.
Press Z to exit the Home menu.
Preferences
You can set the unit to reduce the power consumption or adjust the
backlight brightness in Location setting.
fun-Link (HDMI CEC) allows you to operate your connected HDMI-CEC
device.

Setting your location to home

Choosing Home gives you full flexibility to change predefined settings
for picture and sound.
1
Use H I to Select Preferences, then press OK.
2
Use H I to Select Location, then press OK.
Location
Language
Preferences
fun-Link (HDMI CEC)
Restore default settings

HDMI mode

TV placement
E-sticker
3
Use H I to Select Home, then press OK.
The Unit will be set up with predefined settings for
Retail
retail displays. In this setting, you can set the
backlight brighter.
The Unit is set to maximize the energy efficiency for
Home setting and it can be adjusted through a choice
Home
of Picture and Sound quality selections according to
your preference.
Note(s)
You must set Home in the Menu. Otherwise, personalized Picture and Sound Settings will
●
Not Be Memorized after the Unit goes into Standby Mode.
HDMI mode
If there are issues with picture/color and/or sound when connecting an
external device using the HDMI port, please try switching the HDMI
mode following the instructions below.
1
2
English
3
Français
Español
4
5
6
7
The HDMI connector with HDMI mode set to Legacy (Compatibility) supports up to UHD
●
30P, while The HDMI connector with HDMI mode set to Normal supports up to UHD 60P.
Switching the HDMI mode between Normal and Legacy (Compatibility) may cause loss
●
of HDMI CEC functionality in certain cases.
TV placement
To apply the best settings for your TV, select wall mount or stand
mount.
1
2
3
E-sticker
When you set Location to Retail, E-sticker (Electronic Sticker) is
displayed. E-sticker can be Turned Off using procedure below.
1
2
3
Retail
Home
Press Z and use J K to Select Setup, then press OK.
Use H I J K to Select TV settings, then press OK.
Use H I to Select Installation, then press OK.
Use H I to Select Preferences, then press OK.
Use H I to Select HDMI mode, then press OK.
Use H I to Select HDMI1, HDMI2 or HDMI3, then press OK.
Use H I to Select Legacy (Compatibility), then press OK. If this
does not solve the problem, then try Normal.
When switching the HDMI configuration (Legacy Û Normal), the
●
screen will black out for a moment, then come back on.
Note(s)
Use H I to Select Preferences, then press OK.
Use H I to Select TV placement, then press OK.
Use H I to Select Wall mounted or On a TV stand, then press
OK.
Use H I to Select Preferences, then press OK.
Use H I to Select E-sticker, then press OK.
Use H I to Select Off, then press OK.
33 .
English
Continued on next page.